- milltronics centurion 7 - Startup error 188
-
Member
-
-
Member
Re: milltronics centurion 7 - Startup error 188
You want that topmost error code, error 956.
In the Cent7 manual:
188 Also appears as error 956.
Interface card communication failure
Centurion 7 and 7000 Series only
CNC Version 238 and newer
NCB Firmware 3.19 and newer
No information was received from the interface card for 10 heartbeats
of the control, about .01 seconds.
CAUSES:
1. Fiber-optic cable loose.
2. Bad interface card.
3. Bad NCB card, since it must receive the information from the interface card.
4. Bad fiber-optic cable.
- milltronics centurion 7 - Startup error 188
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules