Originally Posted by
EmeraldIsleforg
I'm working on getting my tool changer working again after having the control re-installed. For some reason everything seems mixed up, all the M codes don't do what they are supposed to. Here's a list of what they do:
M19- makes a quick little noise/hum towards the back of the machine
M20- nothing
M21- Drum motor on/off quickly
M22- Drawbar cycles up & down quickly, control waits for something
M23- cycles plunger in carousel
M24- cycles plunger in carousel, control waits on something
M25- Spindle motor turns a hair
M26- Spindle orient cylinder cycles quickly
M27- nothing
M28- nothing
I thought maybe I put a wiring connector in the wrong place on the computer but everything appears to be in the correct location.
I have a 6 pocket tool change with the plunger that comes down to lock over a cone on the turret.
Any ideas?
Thanks!
Mike