Setting work offsets

Results 1 to 9 of 9

Thread: Setting work offsets

  1. #1

    Default Setting work offsets

    How do I offset different sized work pieces and have tool automatically adjust ZTool height(s)?

    Hopefully this is a simple to answer and stupid question.

    Few months ago, I got an MB16 with SLC CNC 6.107 for home shop.
    I started buying up NMTB30 holders so I didn't have to change and reset Z-Height every time I changed a cutting tool.
    Now I'm ready to touch off and store all my different cutters and I know where in machine I have tool library.

    The question is, how do I tell the tool where the zero is for the work piece?
    I see where in the Jog (F2) or HDW (F3) menus I can zero X & Y by using F5 & F6 (G54-X & G54-Y), but the only thing for the Z is a an F7 (ZTool).

    Problem with that, is that it only changes Z-Height for that one tool, and the rest of the tools are unaffected.
    Clearly, the tool is smart enough to know that if i have 1 tools in the library and say each tool is exactly 1" longer then the previous, when I touch off on a part with tool 5 for example, the other 9 tool heights should also be adjusted. Am I wrong?

    Like I said, this is a home shop machine, but lets say I wanted to make 10 gizmos and each required 3 tool changes. No matter how careful I could try, each workpiece will be slightly off.
    I know I can use a jig, base holder, etc. For sake of argument lets say that each piece is different.




    Similar Threads:


  2. #2

    Default Re: Setting work offsets

    Setting work offsets-20200905_081911_2-jpg

    Attached Thumbnails Attached Thumbnails Setting work offsets-20200905_081911_2-jpg  


  3. #3
    Member moldcore's Avatar
    Join Date
    Apr 2003
    Location
    USA
    Posts
    633
    Downloads
    0
    Uploads
    0

    Default Re: Setting work offsets

    There is a parameter that will turn on the G54-Z on your screen. I'm not sure where it is or why this is even turned off, It was off on my machine. I had Milltronics walk me through it after I found out this was available. Give them a call.



  4. #4

    Default Re: Setting work offsets

    I called them yesterday. Walked thru the menus but couldn't find the setting.
    The TS is escalating it to next level but told me it might not be possible.

    Quote Originally Posted by moldcore View Post
    There is a parameter that will turn on the G54-Z on your screen. I'm not sure where it is or why this is even turned off, It was off on my machine. I had Milltronics walk me through it after I found out this was available. Give them a call.




  5. #5
    Member moldcore's Avatar
    Join Date
    Apr 2003
    Location
    USA
    Posts
    633
    Downloads
    0
    Uploads
    0

    Default Re: Setting work offsets

    It may be because your machine doesn't have a tool changer? I'm surprised they didn't tell you why.



  6. #6

    Default Re: Setting work offsets

    Quote Originally Posted by moldcore View Post
    It may be because your machine doesn't have a tool changer? I'm surprised they didn't tell you why.
    The tech I spoke to was very pleasant and tried to help.
    We went into Lev.3 settings and found the area where it 'should have been'.
    He told me the line should be right after (I can't remember now), but that option wasn't there.
    Tech told me he was more of a hardware guy but was going to send an email to the software dude.



  7. #7
    Member
    Join Date
    Oct 2017
    Location
    United States
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Re: Setting work offsets

    In MDI try:
    PB489=255



  8. #8

    Default Re: Setting work offsets

    Quote Originally Posted by stagen View Post
    In MDI try:
    PB489=255
    I did that. What am I looking for?
    I typed that under the F9(Misc).
    I pressed F1 (Store) and Cycle Start
    It took me theo the Display window (normally F6), but no changes to Jog nor HDW that I can see.



  9. #9
    Member
    Join Date
    Oct 2017
    Location
    United States
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Re: Setting work offsets

    On my control setting that parameter byte turns on/off the G54-Z tab in HDW.
    It’s possible that wasn’t an option until the latter software versions (mine is x.305) or possibly not available on the SLS control.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Setting work offsets

Setting work offsets

Setting work offsets