Dorian Smart Dex jamming

Results 1 to 1 of 1

Thread: Dorian Smart Dex jamming

  1. #1
    Member
    Join Date
    Jun 2007
    Location
    USA
    Posts
    93
    Downloads
    0
    Uploads
    0

    Default Dorian Smart Dex jamming

    After a long and frustrating journey , I have finally solved my problem with the turret indexing , or jamming when it gets an M6 command .
    Several years ago I had a situation where the turret would not lock .
    Then I had a problem where the turret would not unlock , and just hum and go into a fault .
    In both cases , it turned out to be the MAC air control valve on the back of the Dorian control box .
    Now wanting to get into too much detail here , but if your MAC valve is hissing when the turret is " at rest " then it is out of adjustment ,
    and will cause all sorts of problems . ( like diverting air to both sides of the locking cylinder ) .
    I will post my maintenence report if anyone is having a similar problem .
    Considering that the MAC valve assembly is pretty cheap , it is worth a try to replace it .

    Similar Threads:


  2. #2
    Sleve_Hope's Avatar
    Join Date
    Apr 2020
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default Re: Dorian Smart Dex jamming

    That's good to know, that you are willing to help..!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Dorian Smart Dex jamming

Dorian Smart Dex jamming

Dorian Smart Dex jamming