Dorian Smart Dex jamming

[chipsinpan]

After a long and frustrating journey , I have finally solved my problem with the turret indexing , or jamming when it gets an M6 command .
Several years ago I had a situation where the turret would not lock .
Then I had a problem where the turret would not unlock , and just hum and go into a fault .
In both cases , it turned out to be the MAC air control valve on the back of the Dorian control box .
Now wanting to get into too much detail here , but if your MAC valve is hissing when the turret is " at rest " then it is out of adjustment ,
and will cause all sorts of problems . ( like diverting air to both sides of the locking cylinder ) .
I will post my maintenence report if anyone is having a similar problem .
Considering that the MAC valve assembly is pretty cheap , it is worth a try to replace it .

Similar Threads:

• aloris or dorian tool holders
• Dorian Gang Tool Set-up for Haas TL-1
• Just IN- Buy Smart Bar Puller,Get Bonus Smart Bar Stopper
• Dorian manual turret on a TL2
• Dorian Turret

[Sleve_Hope]

That's good to know, that you are willing to help..!