Single Board Upgrade

Results 1 to 2 of 2

Thread: Single Board Upgrade

  1. #1
    Activation process jonrya91's Avatar
    Join Date
    Jul 2018
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Single Board Upgrade

    Has anyone done a single board upgrade themselves? Is it as easy as purchasing the PC and installing or is there some integration that needs to happen?

    Similar Threads:


  2. #2
    Member
    Join Date
    Sep 2010
    Location
    Phoenix, AZ USA
    Posts
    466
    Downloads
    0
    Uploads
    0

    Default Re: Single Board Upgrade

    It's not buy any old computer and run the machine. You have to have an ISA backplane to use the Acroloop motion cards. Now I think you can find a "single board computer" that plugs into the ISA backplane and then you can go from there. What processor and such you can upgrade to, I wouldn't know. You are still running software that needs DOS, so maybe early level Pentium processors might be as "advanced" as you can get. I know a few folks have done this on the group, might be able to find reference using the search function.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Single Board Upgrade

Single Board Upgrade

Single Board Upgrade