Single Board Upgrade

[jonrya91]

Has anyone done a single board upgrade themselves? Is it as easy as purchasing the PC and installing or is there some integration that needs to happen?

Similar Threads:

• Single Board computer for LinuxCNC
• Use of LattePanda Single Board Computer
• Centurion 6 upgrade to single board computer
• 1998 EZ TRAK single board computer
• 3axis unipolar board-single unit

[Brian L]

It's not buy any old computer and run the machine. You have to have an ISA backplane to use the Acroloop motion cards. Now I think you can find a "single board computer" that plugs into the ISA backplane and then you can go from there. What processor and such you can upgrade to, I wouldn't know. You are still running software that needs DOS, so maybe early level Pentium processors might be as "advanced" as you can get. I know a few folks have done this on the group, might be able to find reference using the search function.

[sportybob]

Hi Jonrya. I can answer all your questions.

Give me a call.

sportybob
952-288-6340