Vm 16 took changer issues

Results 1 to 1 of 1

Thread: Vm 16 took changer issues

  1. #1
    *Registered User* Rondon4545's Avatar
    Join Date
    Dec 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Vm 16 took changer issues

    So I'm working on a partner vm 16 with centurion 6 controller and my too changer loses its home I manually rehome it but it loses it right away anyone have any ideas



  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: Vm 16 took changer issues

    Prox sensor or switch out of adjustment maybe?

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    *Registered User* Rondon4545's Avatar
    Join Date
    Dec 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Vm 16 took changer issues

    i thought the same thing however it doesn't seem to want to cycle all the way around I'm thinking that motor or airline issues because it doesn't want to arm out either



  4. #4
    Member
    Join Date
    Jul 2010
    Location
    USA
    Posts
    548
    Downloads
    0
    Uploads
    0

    Default Re: Vm 16 took changer issues

    check display diags axis 2 for an "on pocket" input.

    call me tomorrow and we can walk you thru it

    sportybob
    952-288-6340



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Vm 16 took changer issues

Vm 16 took changer issues