Partner 1 with Centurion V won't allow conversational programming

Results 1 to 2 of 2

Thread: Partner 1 with Centurion V won't allow conversational programming

  1. #1
    Registered
    Join Date
    May 2018
    Location
    United States
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Partner 1 with Centurion V won't allow conversational programming

    Please bear with me, as I am entirely new to the CNC world. I bought a Partner 1 recently, to manufacture parts for by custom pistol business. I am trying to teach myself how to run this machine, and have only had it powered up for a couple days so far. I have noticed when ever I try to open an existing conversational program, or start a new one, I get an error 154. I then have to restart the machine to do anything. The screen says CRC error in data, diskette is bad or not formatted. I have been able to enter parametric text programming and run it. It was a short engraving program I did just to try it. After running it, I saved that program to the floppy with no problem.
    A little bit about my controller that has me a little stumped as well. It is a Centurion V, and on the info screen after the Centurion V it says 5.76. Lower on that screen it reads MS - DOS 6.22, which I've read wasn't used on the 5, only the 6. Also, I have no simdisk card, rather a 1GB hard drive that looks to have been added at some point.
    Any advise on getting the conversational working, or just shedding some light on what I may have going on with this hard drive, would be appreciated



  2. #2
    Registered
    Join Date
    Jul 2010
    Location
    USA
    Posts
    479
    Downloads
    0
    Uploads
    0

    Default Re: Partner 1 with Centurion V won't allow conversational programming

    Hi ACC216, most likely the "full DOS file names is turned on in the MISC parameters which puts it into text file operation. The CRC is a corrupted file / disk of some kind.


    give me a call tomorrow and we'll get it sorted out.

    sportybob
    952-288-6340



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Partner 1 with Centurion V won't allow conversational programming

Partner 1 with Centurion V won't allow conversational programming