Hi Yogi, If all else fails try doing a conversational program, then go look at in text. Program, edit, text it will be the Oxxxx ( O1234) that you made.
sportybob
Hi all,
I’m working on a post processor for a Milltronics lathe with Centurion 6.
It would be very helpful if someone could post a sample g code program. The parts of the program I’m most interested in, are the beginning, the end, and the tool change sequence.
Appreciate everyone’s help!
Yogi
Similar Threads:
Hi Yogi, If all else fails try doing a conversational program, then go look at in text. Program, edit, text it will be the Oxxxx ( O1234) that you made.
sportybob
Thank you Bob! I’ll do that.
I have a Fanuc post that looks to be very close, but needs some minor modification. Still, if someone has a short program to share, that would be very much appreciate.
Yogi
Take a look at this YouTube video
"https://www.youtube.com/watch?v=wXLakFO42cA"
duplicate
yogi107,
Did you ever get the start, tool change and end codes? The conversational output is not easy to follow as a lot of it is not commented - so a pain...
thanks
pt
pt, yes, I put a post together that has been working satisfactory so far. The Centurion control accepts straight g-code, so I didn't have to mess with the conversational too much.
Thanks,
Yogi
www.yogisworkshop.com
Yogi,
I forgot to ask the obvious, what Cam system are you making the post for? I am looking for somebody with a Fusion 360 post for the Milltronics lathe. I can modify my own but I thought I ask as there are many hours of messing around if a noob like me is attempting this...
Thanks
Peter
Peter,
I’m using Gibbs, with Posthaste as post processor.
Yogi
www.yogisworkshop.com