I'm going to go out on a limb here and guess that your fixture offsets are not correct.
Hey lads, new to the world of cnc...voluntold I have haas mini and im am at a loss. I have 6 fixture of which 3 are the from and other 3 reverse. Each fixture has mirror image of other side. I'm finding when I drill a hole they are not matching and if i adjust offset it just moves one closer to the edge of the part not centering on both parts. any idea? I know this is not much to go on but I lack cnc language without your help.
I'm going to go out on a limb here and guess that your fixture offsets are not correct.
Jim Dawson
Sandy, Oregon, USA
hy gingervitis i admire your spontaneity, try to keep it ...
as for the drilling, there is something pretty basically that you may have skipped; look for a haas guy in your area, he should spot the mistake and be able to cover the basiscs pretty fast with you / kindly
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...