Gun Drill as CNC Mill Base

Results 1 to 1 of 1

Thread: Gun Drill as CNC Mill Base

  1. #1
    Member Jtcooper2008's Avatar
    Join Date
    Jan 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Gun Drill as CNC Mill Base

    Hello,

    I just got the attached for almost nothing on an industrial auction.

    I have been planing on doing a CNC mill in epoxy granite for a will but when I locked eyes on this it screamed at me. My plan is to remove the motor/spindle plate. replace the lead screw with a ball screw and use this as my base and the x axis. I cant tell if the box way are captive but even if not it seems like the weight of the Y axis should keep it on the rail.

    I am mostly asking for general opinions and idea but my main questions concerns the spindle and motor. They are setup for 3600rpm 2Hp which seems to put me in the right range but how the hell do I mount that monster on a movable x axis. I originally picked up some hiwin 20mm rails for this axis but I can imagine it will take the sort of torsion and pulling loads that thing will have. I know bridgeports and the like keep the motor rigid and move the tables up and down but I have no idea how to make that happen either. I have seen some knee mill use ways to move the motor assembly up and down but that seems impracticable.

    I am hoping someone with more experience than me can see the solution of how to set this up in the minds I.

    Thanks,
    John

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Gun Drill as CNC Mill Base-f843c5b0-48de-403b-8a14-ac210126989e-jpg  
    Last edited by Jtcooper2008; 09-10-2020 at 07:28 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Gun Drill as CNC Mill Base

Gun Drill as CNC Mill Base

Gun Drill as CNC Mill Base