Turn down the shank to 6mm maybe?
Without a picture of your indicator, it's really hard to say what might be a good option.
Hello
I had to down grade my spindle and now my dial indicators 10mm shank wont fit my 6mm er11 collet. Wondering if anyone has some ingenious ideas on how i can mod it to fit my 6mm collet.
Thanks for reading
Turn down the shank to 6mm maybe?
Without a picture of your indicator, it's really hard to say what might be a good option.
Jim Dawson
Sandy, Oregon, USA
As you can see in the picture the shank and the dial are one piece so it would be able to be turned
...hire a Tool/Die machinist. or turn down the end use____== ing a Lathe or CNC mill to 6mm only as deep of a step to fit nice in your 6mm collet then you can still use the 10mm
Last edited by machinehop5; 08-06-2020 at 01:37 AM. Reason: or mill