hy, pls share a photo with your triunion
i will show you what to measure, but i need to see it
by the way, there is a nice okuma forum here : https://www.cnczone.com/forums/okuma/our machines that we are using here (mostly Okuma)
kindly
Hello all,
First post. A little about me, I have been a programmer and machinist for 3 years (machining 6). I have a pretty good grasp on Mastercam and our machines that we are using here (mostly Okuma). We machine parts for all industries and even though it's a rather large subsidiary of a big company, it has more of a job shop type feel with 1~10pc runs. Recently we got a Tsudakoma TWA-160 Rotary table for our M560.
Herein lies my problem.
I have it mounted on the right side of the table so that the trunnion rotates towards -X. So C90 would be with the face of the table pointed towards the left of the machine. I want to know how I could pick up the "Center of rotation" on this unit. I have used other trunnions in the past but they have been the style that will allow C90 and a C-90 but the trunnion that we have has a travel of +110 -30. We have some parts to machine that are primarily positional. We have a Lang Subplate and a Lang Low profile 3 jaw as our workholding, but picking up the Z position has me a little stumped.
If you have any information or could point me in the right direction, I'd truly appreciate it.
Similar Threads:
hy, pls share a photo with your triunion
i will show you what to measure, but i need to see it
by the way, there is a nice okuma forum here : https://www.cnczone.com/forums/okuma/our machines that we are using here (mostly Okuma)
kindly
Last edited by deadlykitten; 07-14-2020 at 12:42 PM.
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...