Mach3 gcode work piece very very small

Results 1 to 7 of 7

Thread: Mach3 gcode work piece very very small

  1. #1
    Member
    Join Date
    Dec 2016
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Mach3 gcode work piece very very small

    Hello created Gcode in aspire 9.4 saved it and when I load it onto Mach3 the work piece that I want to cut is very very small and the z,x,y, axis sizes change to 3 to 4 meters when they were just about 100mm before loading the gcode please help I am really wanting to cut my first bit of work
    thank you



  2. #2
    Member Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    4051
    Downloads
    0
    Uploads
    0

    Default Re: Mach3 gcode work piece very very small

    If Aspire is set for mm output then make sure Mach3 is also set for mm, or vise-versa.

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Member ACCTEK-Barry's Avatar
    Join Date
    Feb 2020
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Mach3 gcode work piece very very small

    Is this the first time the machine start work?If it is ,maybe the moter step parameters is not correct.
    Hope it would be helpful



  4. #4
    Member
    Join Date
    Dec 2016
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default

    yes set both mm thanks, have it so no inlarge of my DRO`s but now code is 263645 lines for six cut outs and 24 holes anyone out there help please. saved gcode in gcode mm tap.



  5. #5
    Member
    Join Date
    Dec 2016
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default

    hi to answer from Barry yes have machined before with mach3 on this machine but not from aspire 9.5 gcode seems to load correctly when use save post Gcode mm tesx but not when I use the mach3 auto tool change or arc mach3 posts to save gcode
    help please



  6. #6
    Member
    Join Date
    Jan 2005
    Location
    USA
    Posts
    10788
    Downloads
    0
    Uploads
    0

    Default Re: Mach3 gcode work piece very very small

    Quote Originally Posted by Jim Dawson View Post
    If Aspire is set for mm output then make sure Mach3 is also set for mm, or vise-versa.
    You don't have to have the machine control match the code it can be Inch the other can be metric all that is needed is a G20 for inch program in the start of the program or G21 for metric at the start of the program

    Mactec54


  7. #7
    Member
    Join Date
    Jan 2005
    Location
    USA
    Posts
    10788
    Downloads
    0
    Uploads
    0

    Default Re: Mach3 gcode work piece very very small

    Quote Originally Posted by hazzard1 View Post
    hi to answer from Barry yes have machined before with mach3 on this machine but not from aspire 9.5 gcode seems to load correctly when use save post Gcode mm tesx but not when I use the mach3 auto tool change or arc mach3 posts to save gcode
    help please
    Just cut and paste the first 20 lines of code here I will take a look at it

    Mactec54


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mach3 gcode work piece very very small

Mach3 gcode work piece very very small

Mach3 gcode work piece very very small