- okuma multus b300 HELP HELP
-
Member
okuma multus b300 HELP HELP
im not an okuma guy just recently stared working with one.
but theres no one that could give me in the right direction
problem im having is touching a mill to at B=75 manually (not using a probe )
my program looks like this
GOO X5.0012 Z0.7536 TL=031031 BA=75 G52 SB=680 M404
G138 C0
G174 SX=-0.002 SZ=0
G127 B75
Im using a 2.5 insert endmill
i have tried touching tool on X AND Z multiple ways and nothing seems to work
-
- okuma multus b300 HELP HELP
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules