The italian machines usually have a vernier scale, a strip of thin alloy scriveted into the casting.usually 4cm x 1cm, has decimal degrees, maybe your chart has degree minute seconds and is causing confusion?
Hello everyone I have a CME FS2 with a Huron universal style head .
I’ve worked Huron’s for years and know how to set the head to machine along the x axis .
But when u set the angle to the chart in the manual it is nothing like it should be .
Does anyone have a Huron table for setting the head ?
Or can point me as to where I’m going wrong .
I’ve tried the calculator advertised everywhere but it won’t run . Says need internet connection, that it has so can’t go any further
Thanks in advance Chris
Similar Threads:
The italian machines usually have a vernier scale, a strip of thin alloy scriveted into the casting.usually 4cm x 1cm, has decimal degrees, maybe your chart has degree minute seconds and is causing confusion?
Wisdom results from foolishness!
The italian machines usually have a vernier scale, a strip of thin alloy scriveted into the casting.usually 4cm x 1cm, has decimal degrees
Dear eppo,
I am sorry for my free application not working right now (from play store) due to some issues with my google play console account,
But i am selling pro version of this ass on Amazon app store, which is fully functional and completely ad free and offline version
Link below
https://www.amazon.in/Universal-Huro.../dp/B07WM1D5VM