- Kasuga Mill RC-850 with Heidenhain TNC 355
-
Member
Kasuga Mill RC-850 with Heidenhain TNC 355
Hello All,
First let me introduce my self as I am new here, I am Bertrand from Sydney Australia.
I recently purchased the above machine, it was lying idle for some years and hence lost its parameters. I have access to the machine parameters and entered them into the machine.
What I am stuck now is that I dont have the PLC program and parameters specifically for the machine.
The machine is from February 1989.
Any help will be greatly appreciated.
Thank you
Bertrand
Similar Threads:
-
-
Member
Re: Kasuga Mill RC-850 with Heidenhain TNC 355
-
Member
Re: Kasuga Mill RC-850 with Heidenhain TNC 355
Thanks Machinehop5, I have downloaded the documentation, etc. cannot find the PLC parameters for my machine.
- Kasuga Mill RC-850 with Heidenhain TNC 355
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules