Haas Toolroom Mill TM1 Tool Changer Arm

Results 1 to 2 of 2

Thread: Haas Toolroom Mill TM1 Tool Changer Arm

  1. #1
    Member Mcdivit's Avatar
    Join Date
    Aug 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Haas Toolroom Mill TM1 Tool Changer Arm

    I am fitting an umbrella tool changer to a Haas Tool Room Mill, TM1, but do not have the mounting arm.
    I believe it to be 4" square tubing.
    I would like to know the dimensions.

    I have one source that I think is saying:
    Top arm (running from top of mill to left) 10.9375"
    Vertical Arm (from top arm down to forward arm) 16.25" (including width of forward arm)
    Forward arm (from back to front including vertical arm width): 17.25"

    If anyone could confirm these I would be grateful

    Or if anyone has one they would be willing to part with ........

    Cheers,
    Chris

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Haas Toolroom Mill TM1 Tool Changer Arm-arm-dims-jpg  


  2. #2
    Member Mcdivit's Avatar
    Join Date
    Aug 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Haas Toolroom Mill TM1 Tool Changer Arm

    Oh, also, how thick are the mounting plates (one on the top of the mill, and the other attached to the changer)



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Haas Toolroom Mill TM1 Tool Changer Arm

Haas Toolroom Mill TM1 Tool Changer Arm