Inappropriate Haas "Alarm 430 File Unexpected End of Input"

Results 1 to 1 of 1

Thread: Inappropriate Haas "Alarm 430 File Unexpected End of Input"

  1. #1

    Default Inappropriate Haas "Alarm 430 File Unexpected End of Input"

    I do have the beginning and end "%", which is what Haas suggests the problem is. I've omitted some special characters from notes, omitted spaces in case I had one where I shouldn't, etc. I keep getting this alarm when I try to load from USB. Any suggestions? Thanks!


    %
    O08940(NT 89402)
    G0G90G80G40G17
    (DIAL IN FIXTURE HOLE AS G54X0Y0)
    (BLACK SURFACE AS G54Z0)
    (G55 G56 PICKED UP BY PROBE)
    G10L2P1X-27.62Y-12.82Z7.80
    (T25 PROBE)
    (T1 1” KEY CUTTER)
    (T2 #4 CD)
    (T3 .516 D)
    (T4 .257 D)
    (T5 1/4” RUF, SET .27)
    (T6 1/4” FIN)
    T25M6
    G0G90G54G43H25X-2.7Y0Z5.
    Z1.T2
    G65P9832
    G65P9810Z.33F10.
    G65P9811X-3.05F10.
    #101=#185
    G0Z1.
    X2.7Y0
    G65P9810Z.33F10.
    G65P9811X3.05F10.
    #102=#185
    G0Z1.
    #5241=.5*[#101+#102]
    X1.2Y-2.7
    G65P9810Z.33F10.
    G65P9811Y-3.05F10.
    #101=#186
    G0Z1.
    X1.2Y2.7
    G65P9810Z.33F10.
    G65P9811Y3.05F10.
    #102=#186
    G0Z1.
    #5242=.5*[#101+#102]
    X1.5Y-2.
    G65P9810Z.1F10.
    G65P9811Z0F10.
    #101=#187
    G0Z1.
    #5243=#101
    G0Z2.
    X3.6Y0
    G65P9810Z1.5F10.
    G65P9811Z1.4F10.
    #101=#187
    G0Z1.
    #5443=#101
    G0Z2.
    X3.Y0
    G65P9810Z1.F20.
    G65P9811X3.4F10.
    #5241=#185
    G0Z2.
    X4.Y3.3
    G65P9810Z1.F20.
    G65P9811Y3.F10.
    #101=#186
    G0Z2.
    X4.Y-3.3
    G65P9810Z1.F20.
    G65P9811Y-3.F10.
    #102=#186
    G0Z2.
    #5442=.5*[#101+#102]
    G65P9833
    G0Z5.M9
    M1
    T2M6
    G0G90G54G43H2X0Y0M3S917Z5.
    Z.1T3
    G73R.08Z-.14Q.02F1.2
    G0Z5.M9
    M6T3
    M1
    G0G90G54G43H3X0Y0M3S222Z5.
    Z.1T1
    G73R.08Z-.24Q.02F1.2
    G0Z5.M9
    M6T1
    M0
    (ADD BOLT)
    M0
    G0G90G55G43H1X1.3Y1.5M3S114Z5.
    Z.6T2
    G1Z.005F20.
    X1.6Y-1.8F1.1
    G0Z5.M9
    M1
    M6T2
    G0G90G55G43H2X2.25Y2.25M3S917Z5.
    Z.1T4
    G73R.02Z-.2Q.02F1.2
    X-2.25
    Y-2.25
    X2.25
    X2.Y0
    G0Z5.M9
    M6T4
    M1
    G0G90G55G43H4X2.25Y2.25M3S458Z5.
    Z.1T5
    G81R.02Z-.2F1.2
    X-2.25
    Y-2.25
    X2.25
    X2.Y0
    G0Z5.M9
    M6T5
    M1
    G0G90G55G43H5X2.Y0M3S4580Z5.
    Z.1T6D5
    G1Z-.1F9.
    G41X2.36
    Y1.692,R.25
    X1.692Y2.36,R.25
    X-1.692,R.25
    X-2.36Y1.692,R.25
    Y-1.692,R.25
    X-1.692Y-2.36,R.25
    X1.692,R.25
    X2.36Y-1.692,R.25
    Y.02
    G40X2.
    G0Z2.
    G56X.6Y2.2
    Z.1
    G1Z-.2
    G41Y2.435
    X.28
    Y-2.435
    X.6
    G40Y-2.
    G0Z5.M9
    M6T6
    M1
    G0G90G55G43H6X2.Y0M3S4580Z5.
    Z.1T25D6
    G1Z-.1F18.
    G41X2.36
    Y1.692,R.25
    X1.692Y2.36,R.25
    X-1.692,R.25
    X-2.36Y1.692,R.25
    Y-1.692,R.25
    X-1.692Y-2.36,R.25
    X1.692,R.25
    X2.36Y-1.692,R.25
    Y.02
    G40X2.
    G0Z2.
    G56X.6Y2.2
    Z.1
    G1Z-.2
    G41Y2.435
    X.28
    Y-2.435
    X.6
    G40Y-2.
    G0Z5.M9
    G91G28Y0Z0
    M6
    M30
    %

    Similar Threads:


  2. #2
    CJR1985's Avatar
    Join Date
    Aug 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Something similar has happened to me and putting a space/EOB after each “%” fixed it.

    Just curious: does your program work not having G02/G03 when circular interpolating and also with the commas (,)?

    Hope you figure out your issue.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Inappropriate Haas "Alarm 430 File Unexpected End of Input"

Inappropriate Haas "Alarm 430 File Unexpected End of Input"

Inappropriate Haas "Alarm 430 File Unexpected End of Input"