Key or slot cutting mill with edge radius

[BMC_Dave]

I'm looking for suggestions about a tool I've been unable to find. I need to make some circular undercuts with a Tormach 1100. Making parts that are better suited to a lathe but this is what I have. I can't seem to find slotting or keyseat cutters that have radii on them, I need a .03" radius. I'd appreciate any suggestions, thanks.

Similar Threads:

• Problem- Cut a slot in Path Pilot - Zero radius arc
• Need Help!- Cutting a Radius with a Ball End Mill
• Solved V25 Mill Radius Edge Break On Angled Feature
• Need Help!- Cutting Slot With Ball Mill
• HELP... Can't create radius on edge

[burbingus]

Hey Dave,

It looks like Harvey Tool has some cutters that might be what you're looking for. Check out this link:

Harvey Tool - Carbide Keyseat Cutters - Full Radius

Harvey Tool - Carbide Keyseat Cutters - Full Radius Large Diameter

Some other specialty tooling places may have what you want.+

[BMC_Dave]

Hey Dave,

It looks like Harvey Tool has some cutters that might be what you're looking for. Check out this link:

Harvey Tool - Carbide Keyseat Cutters - Full Radius

Harvey Tool - Carbide Keyseat Cutters - Full Radius Large Diameter

Some other specialty tooling places may have what you want.+

Rock on, some of those look like they might work. Thanks!

[burbingus]

No problem, good luck!