Mikron Haas VCE 500 backup download


Results 1 to 5 of 5

Thread: Mikron Haas VCE 500 backup download

  1. #1
    Member
    Join Date
    Jul 2014
    Posts
    221
    Downloads
    0
    Uploads
    0

    Default Mikron Haas VCE 500 backup download

    Hello guys,
    is there a way to download backup for this older machine like you do on newer ones? What is the procedure for that?

    Secondly, what can you see in that backup and is it possible to somehow see machine state in the alarm conditions?

    We have a problem that the machine will show alarm 115 turret rotate fault while the umbrella changer is still in the in position (meaning it hasnt even moved yet), so I'm thinking it is getting signal that the ATC is out and drum needs to rotate, but it really shouldnt, so I was thinking if there was a way to check signal history inside backup files?

    Thakns in advance.

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    322
    Downloads
    0
    Uploads
    0

    Default Re: Mikron Haas VCE 500 backup download

    Hi!
    Unfortunatelly backup contains only list of parameters and values. Those files was supposed to fit in 1MB disqette so there is nothing unnecessary to put the control back up.
    Does the alarm appear right away? Or in few seconds after start of toolchange? And is the umbrella changer in position 1?

    This changer is pretty simple.



  3. #3
    Member
    Join Date
    Jul 2014
    Posts
    221
    Downloads
    0
    Uploads
    0

    Default Re: Mikron Haas VCE 500 backup download

    Quote Originally Posted by steryd View Post
    Hi!
    Unfortunatelly backup contains only list of parameters and values. Those files was supposed to fit in 1MB disqette so there is nothing unnecessary to put the control back up.
    Does the alarm appear right away? Or in few seconds after start of toolchange? And is the umbrella changer in position 1?

    This changer is pretty simple.
    Alarm appears right away, umbrella hasnt even moved yet a bit...



  4. #4
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    322
    Downloads
    0
    Uploads
    0

    Default Re: Mikron Haas VCE 500 backup download

    That can be caused by move sensor- rotation of changer is moved by Geneva mechanism. It is a gear that changes continous rotation of motor into a stepped rotation. And there is a sensor near the middle of umbrella that senses if geneva gear is in position of tool nest (not in reference position cause there is separate sensor for that). If it thinks that changer is not in tool clamping position it can't make moves, cause toolchange attempt would effect toll fall down.



  5. #5
    andreenoren's Avatar
    Join Date
    Apr 2023
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Mikron Haas VCE 500 backup download

    As for checking the machine state in alarm conditions, the backup file may not provide direct visibility into the signal history. However, it's possible that the backup could contain logs or event records that may help diagnose the cause of the alarm. These shell shockers logs may provide timestamps and other relevant information related to alarm occurrences, which could be helpful in troubleshooting the issue you mentioned.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mikron Haas VCE 500 backup download

Mikron Haas VCE 500 backup download