instruction parameter programming / macro programming


Results 1 to 3 of 3

Thread: instruction parameter programming / macro programming

  1. #1
    Member kickinger's Avatar
    Join Date
    Nov 2004
    Location
    Steyrermühl
    Posts
    160
    Downloads
    0
    Uploads
    0

    Default

    Hello
    Has anybody an instructions manual about parameter programming/ macro programming?

    Best regards
    Christian

    HAAS VF7 - BJ2008<br />HAAS ST20<br />HAAS ST10 mit Stangenlader<br />HAAS Mikron VCE1000<br />EMCO 365<br /><br />www.KDC-Technik.at


  2. #2
    Registered hh-toadie's Avatar
    Join Date
    Oct 2007
    Location
    Bergisch Gladbach
    Posts
    186
    Downloads
    0
    Uploads
    0

    Default

    Hello Christian
    Just get familiar with the handbook and when you don’t know how to continue then it’s best to ask a precise question about it. Generally the parameter programming on a Haas is as ‘easy’ as on any other CNC machine…

    It took me about 3-4 hours and a little bit ‘try & error’ to get familar with it.thumbs-up.gif

    Regards
    toadie



  3. #3
    Member kickinger's Avatar
    Join Date
    Nov 2004
    Location
    Steyrermühl
    Posts
    160
    Downloads
    0
    Uploads
    0

    Default

    Hello
    that’s exactly my problem. The chapter is missing in the manual or rather I don’t have a programming handbook.

    HAAS VF7 - BJ2008<br />HAAS ST20<br />HAAS ST10 mit Stangenlader<br />HAAS Mikron VCE1000<br />EMCO 365<br /><br />www.KDC-Technik.at


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

instruction parameter programming / macro programming

instruction parameter programming / macro programming