slotting of grooves on the BAZ


Results 1 to 2 of 2

Thread: slotting of grooves on the BAZ

  1. #1
    meistermoppel's Avatar
    Join Date
    Mar 2005
    Location
    Pfinztal
    Posts
    84
    Downloads
    0
    Uploads
    0

    Default

    Hello guys
    Has anybody tried to slotted a feather key groove with the WNT tool on a Mini Mill or a Vf?
    Spindle orientation on board! Who has got some experience?

    Arbeite nur,die Freude kommt von selbst!


  2. #2
    Registered trebreh's Avatar
    Join Date
    Oct 2004
    Location
    Rettersh
    Posts
    296
    Downloads
    0
    Uploads
    0

    Default

    Hello
    I have slotted grooves in 1.4301 with tools from Horn on a DMC 63V- worked really well!
    I have oriented the spindle and then always feed 0,02mm steps- the result was almost always accurately fitted. I hardly needed to do any correction when processing the grooves. However that’s about 5 years ago.
    Hope I was able to help you out.

    Best regards
    Alex



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

slotting of grooves on the BAZ

slotting of grooves on the BAZ