Enter the program


Results 1 to 4 of 4

Thread: Enter the program

  1. #1
    meistermoppel's Avatar
    Join Date
    Mar 2005
    Location
    Pfinztal
    Posts
    84
    Downloads
    0
    Uploads
    0

    Default

    Hello
    When I want to enter the program for example I drive with the hand wheel to Tool 3 and start the machine first in Run in Tool 2 then Z in action and then tool 3 is first changed and then here we go

    How can I turn that off?

    Arbeite nur,die Freude kommt von selbst!


  2. #2
    KAMIE's Avatar
    Join Date
    Jul 2004
    Location
    Saarbrücken
    Posts
    160
    Downloads
    0
    Uploads
    0

    Default

    Good morning smile.gif

    You have 2 possibilities:
    1. Turn off Block search calculation. That has the disadvantage that you can only enter with the tool.
    2. You enter under the set with the tool, then the machine does not undertake a tool change

    The problem is that if you enter directly with the tool, the machine calculates the previous tool as well. Changes and then drives to the last position of that tool ( it’s the same when milling only the risk of collision is smaller.)

    Greetings Michael

    Gruß Michael<br><br><br><br>


  3. #3
    Registered ogelle's Avatar
    Join Date
    Oct 2005
    Location
    Rutesheim
    Posts
    159
    Downloads
    0
    Uploads
    0

    Default

    Hello

    Can you enter you program here please?
    We have a 9 Haas machine and it normal to be able to start with the tool in the spindle. Block search calculation is enabled.

    Regard
    ogelle



  4. #4
    meistermoppel's Avatar
    Join Date
    Mar 2005
    Location
    Pfinztal
    Posts
    84
    Downloads
    0
    Uploads
    0

    Default

    hello here is my little program:

    O100
    ( DEMO-D )
    ( MAGAZIN: PRO-60 )
    G54
    ( SURFACE )
    ( LFR12 )
    G17 T01 M06
    F300. S2500 M03
    G90 G00 X91.876 Y71.9
    G43 G00 Z1.0 H01 M08
    G01 Z-5.0 F150.
    G01 X87.928 F300.
    USW.
    G0Z2

    T02 M06
    F50000. S300 M03
    G90 G00 X91.876 Y71.9
    G43 G00 Z1.0 H02 M08
    G01 Z-5.0 F150.
    G01 X87.928 F300
    USW

    G53Z0
    G53Y0
    M30

    Arbeite nur,die Freude kommt von selbst&#33;


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Enter the program

Enter the program