Hi,
first of all: which error-report do you get? Did your machine activate the G68-function?
I cannot help you with a slot-cycle...
Maybe you can post your program here...
If I were you, I wouldtry this (if I understood right, what you mean):
T1 M6
G0 G90 G54 S2555 F200. M3
G43 H1 M8
#101=0
N1
G68 X0 Y0 R#101
X0 Y10
Z2
G1 Z-10
Y50 F800.
G0 Z2
#101=#101+20
IF [#101LT360]GOTO1
G0 Z200 M30
(no warranty)
This might not be the most elegant solution, but it should work...
Greetings