Mikini 1610L - Tear down, repair and assembly


Results 1 to 2 of 2

Thread: Mikini 1610L - Tear down, repair and assembly

  1. #1
    Registered
    Join Date
    May 2014
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Mikini 1610L - Tear down, repair and assembly

    Hi,

    I have found some play in my X axis trucks so i decided to fix it.

    I have documented the story here:
    Mikini 1610L Tear down and repair (part 1) – Sprocket and Pinion Engineering

    If anyone is interested.

    Regards,
    Tony

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2016
    Location
    United States
    Posts
    316
    Downloads
    0
    Uploads
    0

    Default Re: Mikini 1610L - Tear down, repair and assembly

    Tony,

    Finally got started on mine. All the side jobs finished and I bit the bullet after 2+ years of off-n-on planning.

    Also discovered how Mikini assembled the table/saddle - probably would have helped you earlier if we'd known about this.

    The base is drilled in eight places (2x sets of 4) and there are plastic plugs driven in from the top to seal it. If you drive those plugs out (from the bottom) they line up with the base to saddle truck screws and you can remove the saddle from the trucks. You can do 4x at a time, then shift the saddle forward or back to access the next row of screws. Undo the ballscrew mounts, and the whole table/saddle/screw assembly can lift off the trucks.

    Then it's just a matter flipping it over and the saddle to table truck screws are easily accessed.

    Very similar to taking the head off the column - two holes about halfway down the column gives access to the inner truck screws.

    -Ralph

    Mikini 1610L - Tear down, repair and assembly-20201126_140733-jpgMikini 1610L - Tear down, repair and assembly-20201126_140909-jpgMikini 1610L - Tear down, repair and assembly-20201126_150910-jpgMikini 1610L - Tear down, repair and assembly-20201126_152911-jpg

    Attached Thumbnails Attached Thumbnails Mikini 1610L - Tear down, repair and assembly-20201126_140909-jpg   Mikini 1610L - Tear down, repair and assembly-20201126_140733-jpg   Mikini 1610L - Tear down, repair and assembly-20201126_150910-jpg   Mikini 1610L - Tear down, repair and assembly-20201126_152911-jpg  



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mikini 1610L - Tear down, repair and assembly

Mikini 1610L - Tear down, repair and assembly