Hi,
what external motion controller are you going to use?.
Windows 10 is a 64 bit OS and therefore precludes the use of a parallel port, you must use an external controller like an Ethernet SmoothStepper
or a UC300.
Craig
Hello,
New to the forum here. Currently experiencing issues with updating my MachMation X15-110 from Windows 7 OS to Windows 10. Up to date on all windows 7 service packs, but when I go to install windows 10 it says “The language or edition of the version of Windows currently installed on your computer isn’t compatible by this tool”. Anybody have any experience or work-arounds with this?
Hi,
what external motion controller are you going to use?.
Windows 10 is a 64 bit OS and therefore precludes the use of a parallel port, you must use an external controller like an Ethernet SmoothStepper
or a UC300.
Craig
Hi,
While Windows 10 can be installed as a 32 bit OS Machs parallel port refuses to work with it.
If you want to use a parallel port then 32 bit Windows 7 or 32 bit XP is required.
The original MachMotion kits were based on a parallel port. Whether later kits had external controllers or not I don't know.
Craig
Mactec54