need help, cut guru bits for routing wood on a kongberg xn

Results 1 to 3 of 3

Thread: need help, cut guru bits for routing wood on a kongberg xn

  1. #1
    Registered
    Join Date
    Feb 2018
    Location
    United States
    Posts
    30
    Downloads
    0
    Uploads
    0

    Default need help, cut guru bits for routing wood on a kongberg xn

    im running a kongsberg xn, using bits from cut guru, and i have a job which requires cutting 4 in coasters from a sheet of birchwood. the feed rate and chip load that they supply dont seem accurate when it comes to cutting wood and im hoping someone here has more experience (i only have 2 years experience routing) either on a kongsberg or with cut guru bits that can give some advice. the wood is 5.6 mm thick and im going to be using either the w2-625d or the w2-418d. so far im cutting in two layers and running around 40,000 rpm with a chip load ranging from 200 - 400. any advice on chip loads, feed rates and rpm would be greatly appreciated.

    Similar Threads:


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: need help, cut guru bits for routing wood on a kongberg xn

    15,000 rpm and 125ipm

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    Feb 2018
    Location
    United States
    Posts
    30
    Downloads
    0
    Uploads
    0

    Default Re: need help, cut guru bits for routing wood on a kongberg xn

    with those settings, would you cut in one pass or multiple passes?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

need help, cut guru bits for routing wood on a kongberg xn

need help, cut guru bits for routing wood on a kongberg xn