Chilipeppr Help

Results 1 to 3 of 3

Thread: Chilipeppr Help

  1. #1
    Registered
    Join Date
    Sep 2017
    Location
    Netherlands
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Chilipeppr Help

    Hi all. In the latest Kickstarter Email I read following: Mac Users

    GRBLpanel is a windows-only application, so if you want to use your MicroMill with your MacBook you need to use an alternative controller. We've had reports that the web-based ChiliPeppr works great so we'd suggest giving that a go!

    Anyone any tips for this? How to connect to and set up the MicroMill is still a riddle to me.

    Jos



    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2007
    Location
    Australia
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: Chilipeppr Help

    No personal experience with it, but UGS might be easier to set up and use than ChiliPeppr
    See UGS



  3. #3
    Registered
    Join Date
    Sep 2017
    Location
    Netherlands
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Chilipeppr Help

    I will try UGS. Thanks.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Chilipeppr Help

Chilipeppr Help