Need Help! Problema en eje Z, Acroloc M12, Fanuc M6

Results 1 to 1 of 1

Thread: Problema en eje Z, Acroloc M12, Fanuc M6

  1. #1
    Registered
    Join Date
    Apr 2018
    Location
    Mexico
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Problema en eje Z, Acroloc M12, Fanuc M6

    Buen dia, comunidad, tengo un problema con una maquina Acroloc M12 con control fanuc M6,cuando mando la maquina a Home, X y Y trabajan normalmente, pero en el eje Z se alarma de sobreviaje, cuando toca el primer sensor si se desacelera, pero no se detiene normalmente como X y Y, verificando los diagnosticos 32 para X 33 para Y y 34 para Z, el bit 6 cambia normalmente de 0 a 1 al asar por el primer sensor, pero en Z ya esta en 1 y al pasar por el sensor cambia a 0, quiza esto tenga que ver con el problema.

    Si alguien pudiera ayudarme con este problema lo agradeceria mucho.

    Good day community, I have a problem with an Acrocloc M12 machine with M6 fanuc control. When I turn the machine to Home, X and Y they work normally, but on the Z axis it is over-travel alarm, when it touches the first sensor if it decelerates, but it does not stop normally as X and Y, verifying the diagnoses 32 for X 33 for Y and 34 for Z, bit 6 changes normally from 0 to 1 when roasting by the first sensor, but in Z it is already in 1 and in passing by the sensor it changes to 0, maybe this has to do with the problem.


    If someone could help me with this problem I would appreciate it very much.


    I leave my mail for any help: ing.cristian_sandoval@hotmail.com

    Dejo mi correo para cualquier cosa que se ofresca: ing.cristian_sandoval@hotmail.com

    Similar Threads:
    Last edited by CristianASB; 04-27-2018 at 04:22 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Problema en eje Z, Acroloc M12, Fanuc M6

Problema en eje Z, Acroloc M12, Fanuc M6

Problema en eje Z, Acroloc M12, Fanuc M6