Need Help! Problema en eje Z, Acroloc M12, Fanuc M6

Results 1 to 1 of 1

Thread: Problema en eje Z, Acroloc M12, Fanuc M6

  1. #1
    Registered
    Join Date
    Apr 2018
    Location
    Mexico
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Problema en eje Z, Acroloc M12, Fanuc M6

    Buen dia, comunidad, tengo un problema con una maquina Acroloc M12 con control fanuc M6,cuando mando la maquina a Home, X y Y trabajan normalmente, pero en el eje Z se alarma de sobreviaje, cuando toca el primer sensor si se desacelera, pero no se detiene normalmente como X y Y, verificando los diagnosticos 32 para X 33 para Y y 34 para Z, el bit 6 cambia normalmente de 0 a 1 al asar por el primer sensor, pero en Z ya esta en 1 y al pasar por el sensor cambia a 0, quiza esto tenga que ver con el problema.

    Si alguien pudiera ayudarme con este problema lo agradeceria mucho.

    Good day community, I have a problem with an Acrocloc M12 machine with M6 fanuc control. When I turn the machine to Home, X and Y they work normally, but on the Z axis it is over-travel alarm, when it touches the first sensor if it decelerates, but it does not stop normally as X and Y, verifying the diagnoses 32 for X 33 for Y and 34 for Z, bit 6 changes normally from 0 to 1 when roasting by the first sensor, but in Z it is already in 1 and in passing by the sensor it changes to 0, maybe this has to do with the problem.


    If someone could help me with this problem I would appreciate it very much.


    I leave my mail for any help: ing.cristian_sandoval@hotmail.com

    Dejo mi correo para cualquier cosa que se ofresca: ing.cristian_sandoval@hotmail.com

    Similar Threads:
    Last edited by CristianASB; 04-27-2018 at 03:22 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Problema en eje Z, Acroloc M12, Fanuc M6

Problema en eje Z, Acroloc M12, Fanuc M6