- Want to HIRE someone in DENVER area to bring my CNC router up to spec
-
Want to HIRE someone in DENVER area to bring my CNC router up to spec
Hello,
I have a Legacy Arty router which has been out of service for several years after a relocation.
It is in very good mechanical condition but needs to be recalibrated and updated to run reliably under Windows 10.
This is the current configuration:
GENERAL
Legacy Arty (- Arty Personal CNC - Legacy CNC Woodworking)
24x58" bed
X,Y and Z axis plus rotary drive, tilting bed and water cooled spindle
Mach3 software
STEPPER MOTORS (4)
e60hs100de1t
STEPPER CONTROLLERS
C25 Rev 2.1- Smooth Stepper Terminal Board
https://www.cnc4pc.com/c25-smooth-st...nal-board.html
Variable Speed Control Rev 6
C6R6-S810-11
https://www.cnc4pc.com/c6-variable-s...rol-board.html
Warp9 Smoothstepper v 1.2 motherboard
https://warp9td.com/index.php/sw#WindowsDriverUss
4042D Digital Bipolar Stepper Motor Driver-32 bit DSP Based (Daughter board on Smoothstepper motherboard)
https://www.cnc4pc.com/4042d-digital...dsp-based.html
ROUTER CONTROLLER
Lenze ac tech
Smvector
ESV402N02TXB
If you, someone you know or some company in the Denver area is interested please let me know!
Please send any replies to my email below in addition to posting on the forum.
Thank you!
John
jgmancino@gmail.com
Similar Threads:
-
- Want to HIRE someone in DENVER area to bring my CNC router up to spec
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules