Newbie Two Axis CNC Table


Results 1 to 4 of 4

Thread: Two Axis CNC Table

  1. #1
    Member agaylor's Avatar
    Join Date
    Dec 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Two Axis CNC Table

    Hello Everyone,

    I am working on a project that requires me to build an automated table. This table will function similarly to a CNC; however, it will only have a XY axis and it will not carve/mill any product. Essentially, it will be carrying an object that only weight one poind from point to point.

    This table needs to be a minumum of 2M x 2M (meters). I have never built a CNC machine before, but I under stand how they work. My plan is to use extruded aluminum for the frame. Does anyone have any recommendtions on products/manufacturing/suppliers parts I should use for the build?

    The budget is $3,000 excluding controls. I am incorperating my own control system .

    Similar Threads:


  2. #2
    Member peteeng's Avatar
    Join Date
    Jul 2018
    Location
    dum dum
    Posts
    6254
    Downloads
    0
    Uploads
    0

    Default Re: Two Axis CNC Table

    Hi Agaylor - I suggest you use belts in such an application. A 10 or 16mm AT belt would work fine. Use 15 or 20mm rails and cars and NEMA 17 or 23 steppers. Depending on the speed / acceleration you want is the next question. If you look up the Maximus thread you will see CAD dwgs of this sort of thing. Its for A HD router but you can scale it back to a suitable extrusion size. Does it have a flat base or is it a high rail design with a void? If its $3000USD then you should have lots of change for this simple system....Peter



  3. #3
    Member
    Join Date
    May 2005
    Location
    canada
    Posts
    1662
    Downloads
    0
    Uploads
    0

    Default Re: Two Axis CNC Table

    A CoreXY type design might work although I've never spotted one scaled up to 2 meters.
    Link to an example used for moving a magnet below.
    https://docs.v1engineering.com/zenxy/

    Anyone who says "It only goes together one way" has no imagination.


  4. #4
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: Two Axis CNC Table

    8020 extrusions are a good starting point. https://8020.net/?SID=dm001fm6uhqpj6t8hdmknghrt4

    For inexpensive rails and ball screws VXB Bearing is a good choice. OK quality https://www.vxb.com/

    McMaster is another good source for motion products, more expensive, but good quality products.

    https://www.mcmaster.com/linear

    https://www.mcmaster.com/ball-screws

    Ametric is another vendor I use for belts & pulleys. They also have screws and rails https://www.ametric.com/

    Jim Dawson
    Sandy, Oregon, USA


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Two Axis CNC Table

Two Axis CNC Table