New Machine Build Center of gravity for a CNC machine


Results 1 to 2 of 2

Thread: Center of gravity for a CNC machine

  1. #1
    Member
    Join Date
    Dec 2016
    Location
    Cuba
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Center of gravity for a CNC machine

    I guess that the center of gravity for any CNC machine should be as low as possible. But, how low? Lets take as reference the upper surface of the machine table. What if the center of gravity is above this face?.
    Thanks in advance!
    Best regards
    Felix Pico

    Similar Threads:


  2. #2
    Member Mecanix's Avatar
    Join Date
    Aug 2019
    Posts
    215
    Downloads
    0
    Uploads
    0

    Default Re: Center of gravity for a CNC machine

    Run a natural frequency analysis on your structure and you'll find out right away e.g. model an enforced displacement of the table; linear XC, velocity 200mm/s; hope you like disco and dancing



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Center of gravity for a CNC machine

Center of gravity for a CNC machine

Center of gravity for a CNC machine