axial dampening on the free end of leadscrew/ballscrew.


Results 1 to 2 of 2

Thread: axial dampening on the free end of leadscrew/ballscrew.

  1. #1
    Registered
    Join Date
    May 2013
    Location
    washington
    Posts
    447
    Downloads
    0
    Uploads
    0

    Default axial dampening on the free end of leadscrew/ballscrew.

    I am wondering if anyone has considered adding a spring preload to their ballscrews, to tension the ballscrew. but instead of letting the bearing(s) float, cut a spiral groove in the bore the bearings are located in and fill it with something.. maybe cold patch tar would even be reasonable. polydimethylsiloxane grease would be another.

    You would get the benefit of a tensioned screw but would not have the thermal expansion problem associated with a fixed-fixed pre-tensioned ballscrew.


    i see someone has already filled a gun drilled ballscrew with some kind of dampening material and is reporting substantial improvements.


    given that gun drilled ballscrews may not be all that expensive.. i wonder if a steel rod extending through the screw that doesn't rotate with the screw but is rather fixed to the machine.. with coolant or oil pumped through the gap for cooling.. if the same effect could be realized. dampening would be accomplished by the friction in the fluid between the ballscrew and the rod.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jan 2005
    Location
    USA
    Posts
    9040
    Downloads
    0
    Uploads
    0

    Default Re: axial dampening on the free end of leadscrew/ballscrew.

    Quote Originally Posted by Eldon_Joh View Post
    I am wondering if anyone has considered adding a spring preload to their ballscrews, to tension the ballscrew. but instead of letting the bearing(s) float, cut a spiral groove in the bore the bearings are located in and fill it with something.. maybe cold patch tar would even be reasonable. polydimethylsiloxane grease would be another.

    You would get the benefit of a tensioned screw but would not have the thermal expansion problem associated with a fixed-fixed pre-tensioned ballscrew.


    i see someone has already filled a gun drilled ballscrew with some kind of dampening material and is reporting substantial improvements.


    given that gun drilled ballscrews may not be all that expensive.. i wonder if a steel rod extending through the screw that doesn't rotate with the screw but is rather fixed to the machine.. with coolant or oil pumped through the gap for cooling.. if the same effect could be realized. dampening would be accomplished by the friction in the fluid between the ballscrew and the rod.
    Do it all the time, drill and thread the end of the Ballscrew I use belleville washers to get the tension I need / want

    As for ballscrews with a hole right through is normally used for coolant or a closed loop cooling system, to control thermal expansion they already do this on most high end machines

    Buy a Ballscrew with a ball-cage nut is better than filling a screw with something

    Mactec54


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

axial dampening on the free end of leadscrew/ballscrew.

axial dampening on the free end of leadscrew/ballscrew.