I would use 303, much nicer to machine than 304 or 316
I could use some input on what type of stainless steel to use for a couple shafts.
It should machine and thread nicely.
Low speed application with light loading.
It’s for a couple of telescope mounts.
1.5” dia by 14” long, maybe 200# load
Thanks!
Sent from my iPhone using Tapatalk Pro
Similar Threads:
I would use 303, much nicer to machine than 304 or 316
Jim Dawson
Sandy, Oregon, USA
Ok, thanks for the input
Sent from my iPhone using Tapatalk Pro