Problem Mazak STX48/L32B Not Accepting Gcode


Results 1 to 2 of 2

Thread: Mazak STX48/L32B Not Accepting Gcode

  1. #1
    Member BGCLaser's Avatar
    Join Date
    Sep 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Mazak STX48/L32B Not Accepting Gcode

    This machine has run near flawlessly for 10 years,
    Yesterday it just stopped listening to the computer feeding the DNC (Serial over the tape Interface)

    have tried 3 computers, 2 usb to serial adaptors and scratch made a new cable.
    I have attached a logic analyzer and can confirm we are sending data.
    The strange part is we can still pull data from Mazak to the PC.

    Is there any silly thing we may have missed,
    does anyone know if there is a method to try attach a FDD for a different load method? or does that come over the same interface anyway?

    Also if there are any Service/Tech manuals people could point me toward would be much appreciated.

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2018
    Location
    Canada
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Re: Mazak STX48/L32B Not Accepting Gcode

    do you need a EIA to mazatrol conversion ? added did your machine come with that option



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mazak STX48/L32B Not Accepting Gcode

Mazak STX48/L32B Not Accepting Gcode

Mazak STX48/L32B Not Accepting Gcode