MORI SEIKI TV400 Magazinezero point adjustment problem


Results 1 to 1 of 1

Thread: MORI SEIKI TV400 Magazinezero point adjustment problem

  1. #1
    Member schnorbatticnc's Avatar
    Join Date
    Dec 2020
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default MORI SEIKI TV400 Magazinezero point adjustment problem

    Hello Members!

    I have a problem will my moriseiki Tv-400 with MSC802(50MM). I am getting alarm M01Operation error 0106 4th axis selection during magazine zero setting.
    I went through the procedure according to the manual.I havemade adjust mode M3148 to 1 then made 6440.2 to 1 select c axis but same alarm appears.

    Can any one help me please?

    Similar Threads:


  2. #2
    Member schnorbatticnc's Avatar
    Join Date
    Dec 2020
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: MORI SEIKI TV400 Magazinezero point adjustment problem

    Solved!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

MORI SEIKI TV400  Magazinezero point adjustment problem

MORI SEIKI TV400  Magazinezero point adjustment problem

MORI SEIKI TV400  Magazinezero point adjustment problem