Mazak Mazatrol 640T Parameter Error 26 after replacing battery spindle

[rebernig]

Hello,

Can anyone please help.

First problem was that the battery had to be replaced. This was done with an original battery of the vendor. Now the machin is starting. On the main panel the red light Alarm is showin. The Windows OS is booting but when the mazatrol software open you only can see the red error "Parameter error 26".

Can anyone help ?

Best regards

Gernot

Similar Threads:

• PC-NC_I/F error Mazatrol 640T
• Mazatrol 640T, Nexus 100, battery alarm LED
• Need Help!- mazak qt 200 640T back up parameter
• Need Help!- mazak 640t decimal format parameter ?
• Need Help!- PARAMETER MAZAK SLANT TURN 30 WITH MAZATROL T1

[Stanko1133]

Hallo, please give your mailadresse so I can contact you.

Gesendet von meinem SM-N950F mit Tapatalk

[Arni89]

Hey, i'm sorry. Can anyone help me? After replacing the batteries, the spindle does not want to accept the replacement numbers.

[Stanko1133]

Hey, i'm sorry. Can anyone help me? After replacing the batteries, the spindle does not want to accept the replacement numbers.

Was ist das Problem gib eine mailadresse

Gesendet von meinem SM-N950F mit Tapatalk