Problem Meldas 60 - Communication Problem


Results 1 to 1 of 1

Thread: Meldas 60 - Communication Problem

  1. #1
    Member VSBill's Avatar
    Join Date
    Oct 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Meldas 60 - Communication Problem

    Good day to all.

    I have managed to setup and connect a CNC mill machine (Mitsubishi Meldas 60) to a PC.

    When i am sending a program from PC to CNC everything is ok, but when i am sending from CNC to PC the transferred program either missing spaces and characters (Pic.01) or some characters are altered (Pic.02).

    In the pictures you can see a very simple program. I i wrote it and sent to CNC and then tried to get it back to PC.

    I have tried:
    - To change many parameters mainly in output
    - Tried 2-3 DNC free software and 2 different PCs
    - Tried to change handshake
    - Tried to change the port settings and the FIFO

    I also checked the wiring of the 9pin/25pin RS232.

    Any ideas what else to try?

    Thank you in advance.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Meldas 60 - Communication Problem-02-jpg   Meldas 60 - Communication Problem-01-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Meldas 60 - Communication Problem

Meldas 60 - Communication Problem

Meldas 60 - Communication Problem