Peck tapping without fully retracting


Results 1 to 2 of 2

Thread: Peck tapping without fully retracting

  1. #1
    Member David_viny's Avatar
    Join Date
    Oct 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Peck tapping without fully retracting

    Mazak Mazatrol Nexus 2

    So I've tried this and it didn't work:

    G84.2 G98 X3. Y-0.625 R0.25 Z-1.875 Q.125 F0.07692 I1

    It pecked, then stopped at the Q value, then continued down so its clearly missing a value to move up to.

    According to the manual, parameter F10 is retract distance. Changing it didn't do anything, I will try more values as I have no idea what the unit of measure is for that parameter...

    Any help would be great, - Dave

    Similar Threads:


  2. #2
    Member David_viny's Avatar
    Join Date
    Oct 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Peck tapping without fully retracting

    Well I spoke too soon, the code did work. I had the F10 value too small to notice the retract.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Peck tapping without fully retracting

Peck tapping without fully retracting