Mazak Fusion 640 LCD Screen problem


Results 1 to 1 of 1

Thread: Mazak Fusion 640 LCD Screen problem

  1. #1
    Member
    Join Date
    May 2004
    Location
    United Kingdom
    Posts
    48
    Downloads
    0
    Uploads
    0

    Default Mazak Fusion 640 LCD Screen problem

    Hi Folks,
    We have a problem on our recently aquired 1999 Fusion 640T powered QT250

    The graphics / text is all over one side meaning soft key buttons don't line up, the LHS strip is not visable, leaving a 1" strip of blank screen top-bottom on the RHS.

    Now if this was a CRT you would just tweak the horizonal position pot ! but it isn't.

    It does it straight from boot up, long before the Windows OS loads, so i don't think its a windows control panel setting issue.

    Is this a bios setting thing or some other way of fixing it ?

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Mazak Fusion 640 LCD Screen problem-640-screen-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mazak Fusion 640 LCD Screen problem

Mazak Fusion 640 LCD Screen problem