Need Help! Spindle Issues Mazak EAI


Results 1 to 1 of 1

Thread: Spindle Issues Mazak EAI

  1. #1
    Member
    Join Date
    May 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Spindle Issues Mazak EAI

    We have a VTC 41 Mazatrol Mazak 1991 EIA G code and are having issues on the tool screen it says that there is 00 tool in the spindle. How do input the tool?
    I tried the MDI but it didn't work either. It tries to change the tool and the magazine door will open and spindle will move towards it but will not pick up the tool.
    I am a little new at this and can't find anything in the manuals.
    Help would be greatly appreciated thanks

    Similar Threads:
    Last edited by abettermachine; 05-01-2020 at 10:42 AM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Spindle Issues Mazak EAI

Spindle Issues Mazak EAI

Spindle Issues Mazak EAI