Cannot create work cordinates (G54, G55....) E06 NO SPEC ERROR Meldas 64

[catana]

Hello everybody,
I have cnc milling with meldas 64 control,after loading all the parameters, the machine is working fine but when I'm trying to create the working coordinates (G54, G55....) I get the error: E06 NO SPEC ERROR.
so please if any one know's how to sort this problem out it will be really appreciated
thnx in advance for any help!

Similar Threads:

• Mitsubishi Meldas 500M RS232 Error P460 TAPE I/O ERROR
• Need Help!- cannot create G54 cordinates
• Create NC or select tool ERROR
• Create error message

[RCaffin]

Never heard of the brand, but IF Chinese, it is well-known that they do not all support all g-codes.

Cheers
Roger

[Moitsea]

Im having the same issue. Were you able to work it out. I would like to know.
Cheers Paul

[catana]

Im having the same issue. Were you able to work it out. I would like to know.
Cheers Paul

I contacted this cnc service from india: https://www.sjautomations.com
it was a problem of the parameters they helped me to activate them, only the service can activate them. I recommend them with confidence. They did a very good job, on whats app they guided me to activate those parameters.

[mactec54]

Never heard of the brand, but IF Chinese, it is well-known that they do not all support all g-codes.

Cheers
Roger

Mitsubishi Meldas is a quality Machining center

[mactec54]

Im having the same issue. Were you able to work it out. I would like to know.
Cheers Paul

You may find something in this PDF that will solve your problem

[Moitsea]

You may find something in this PDF that will solve your problem

Thanks, will look into it.

[MAHESH_DELHI]

Hi everybody,
I have cnc milling machine (PINNACLE make VMC with M64 CONTROL) after loading all the parameters, the machine is working properly but when I'm trying to create the working coordinates (G54,G55,G56...) I get the error
E06 NO SPEC ERROR. So please if any one know's how to rectify this problem.
With regards
MAHESH