Hi, you checked the encoder and motor?
Gesendet von meinem SM-N950F mit Tapatalk
Hello
My old VQC 15 has some problems with Y axis.
I threw this alarm today "50 Y FEEDBACK ALARM"
I ran a program that was proved and i just did 5 parts previously.
I got some problems sometime with a EXCESS SERVO LAG alarm on the Y axis aswell.
The Servo drive had "47" on the field with text.
Anyone have any idea about what can be the problem? there is no info in the manual.
Similar Threads:
Hi, you checked the encoder and motor?
Gesendet von meinem SM-N950F mit Tapatalk
Hello. Sorry I dident see your reply utill now.
I changed encoder with Z axis and cleaned everything. It solved it. Atleast temporary. Let's see it it stopped or moved to the z axis. Atleast if it does I know that it's a encoder problem.
Sendt fra min EML-L29 med Tapatalk
If you need an other one, I have it on stock.
Gesendet von meinem SM-N950F mit Tapatalk
Mazak Service over Viber +38640576587
Gesendet von meinem SM-N950F mit Tapatalk