I am trying to do a part in EIA on my sub spindle and the G96 and IPR are not working.
The spindle starts and tool positions, but as soon as it hits the feed line it just sits there.
I had to convert to IPM just to get the machine to cut my part and spindle runs at constant RPM.

Here's my code:

(TOOL - 1010 OFFSET - 1010)
(OD ROUGH LEFT - 80 DEG. INSERT - CNMG-432)
M902
M302
G0 G28 U0. W0.
G0 T1010
M250
G0 B160.
M251
G90
G112 G97 S1500 M304
G0 X3.5 Z-.2 Y.061
M08
G50 S2000
G96 S500 M304
G99 G1 Z-.08 F25.
G1 X1.4 F5.0
G0 Z-.15
X3.5

Similar Threads: