Mazak Multiplex 6500 with a 640T controller


Results 1 to 4 of 4

Thread: Mazak Multiplex 6500 with a 640T controller

  1. #1
    Member JDv's Avatar
    Join Date
    Oct 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Mazak Multiplex 6500 with a 640T controller

    So, boss wants to do offline programming for accuracy on this machine and so, this is our first time around using mastercam to program for this. CIMQUEST gave me a post file off a working Mazak nexus machine and honestly, its not really working out as well as I had hoped.

    Some of the issues have more to do with trying to do milling on the machine, like interpolation and simple slot machining on the OD. I have no working samples of proven Mazak multiplex programs and I'm wondering if anyone here actually does have a vast knowledge of how a gcode program should look like, including milling...


    I was trying to do simple engraving and on one hand, the machine wouldn't move beyond the first g01 code, then I switched it up some and it was going to make a box engraving, which was not what I wanted, so I told the machinist to skip over engraving and we'd do it on the mills.

    Its just frustrating because there isn't a ton of information on mazak multiplex EIA programming.

    If anyone could help, that would be greatly appreciated!

    -JD

    Similar Threads:


  2. #2
    Member rbjem's Avatar
    Join Date
    Sep 2008
    Location
    US of A
    Posts
    54
    Downloads
    0
    Uploads
    0

    Default Re: Mazak Multiplex 6500 with a 640T controller

    Ive have made some very basic eia programs for a super quadrex with 640T, no live tooling though.

    Do you have the eia programming manual? I read though it at least once before jumping into coding the programs.

    With some basic searching online you should be able to find an eia programming manual. Even if its not specifically for a multiplex, reading through it would probably help since the codes are pretty much the same if its a 640T control and a 640T manual.

    Sent from my SM-G930P using Tapatalk



  3. #3
    Member JDv's Avatar
    Join Date
    Oct 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Mazak Multiplex 6500 with a 640T controller

    Quote Originally Posted by rbjem View Post
    Ive have made some very basic eia programs for a super quadrex with 640T, no live tooling though.

    Do you have the eia programming manual? I read though it at least once before jumping into coding the programs.

    With some basic searching online you should be able to find an eia programming manual. Even if its not specifically for a multiplex, reading through it would probably help since the codes are pretty much the same if its a 640T control and a 640T manual.

    Sent from my SM-G930P using Tapatalk
    Unfortunately, I don't. Looked through all the books and only see the Mazatrol programming manual with limited information on the M codes. I don't know if that machine ever came with an EIA programming manual =(



  4. #4
    Member rbjem's Avatar
    Join Date
    Sep 2008
    Location
    US of A
    Posts
    54
    Downloads
    0
    Uploads
    0

    Default Re: Mazak Multiplex 6500 with a 640T controller

    Sorry, i meant a google search. Searching for something like 'Mazak eia manual' has some hits for a guide. Even if its a matrix mnual instead of fusion, the basics are still the same.

    As always, test all new code to avoid any accidents.

    Sent from my SM-G930P using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mazak Multiplex 6500 with a 640T controller

Mazak Multiplex 6500 with a 640T controller

Mazak Multiplex 6500 with a 640T controller