Maybe check the hydraulic pressure? Filter? Low oil? Pressure switch fail?
Hello all ,
Any help / advised is greatly appreciated.
We have Mazak QT15 machine that has the above the error. Behind this we have further alarm 202 Hydraulic pressure down.
We can clear the alarms and then run the machine only if we put some pressure into the slide way lube by manually pumping the injector.
The machine runs for around 10 to 15 minutes and then alarms out again , this happens in cycle while using a peg.
If we open the jaws after cycle to put a new part in , it alarms out straight away.
Thanx
Similar Threads:
- ALARM 20 NMI EMERGENCY STOP.
- Need Help!- NMI 20 Emergency Stop Alarm
- Need Help!- Alarm 20 NMI emergency stop and alarm 204 spindle controller malfunction
- Problem- Nmi emergency stop alarm
- Need Help!- Alarm 128 QT-8 Emergency stop
Maybe check the hydraulic pressure? Filter? Low oil? Pressure switch fail?
Jim Dawson
Sandy, Oregon, USA