M32B on a V-414 will not talk to pc for program input
I am trying to load programs into a V-414 with a Mazatrol M32B control. My cimco transmit settings are com 1 stop bits 2 Parity even Baud 2400 Data Bits 7 Flow control "software", enable DTR and RTS not selected, advanced port settings check parity not selected #(35) insert on parity error, \17 XOn \19 XOff . I keep getting a 551 SET THE NEW PAPER TAPE CODE. I am loading via the "Tape, all load Tape-NC function" The error appears after a few seconds. using mastercam/cimco to transmit, it has worked in the past but is acting up now. I have a pic of my G user parameters page if that will assist in trouble shooting
M32B on a V-414 will not talk to pc for program input
Reply with Quote
